Ablation article and method

An ablation article, such as a conical heat shield, having an ablating surface is provided with at least one discrete area of at least one seed material, such as aluminum. When subjected to ablation conditions, the seed material is ablated. Radiation emanating from the ablated seed material is detected to analyze ablation effects without disturbing the ablation surface. By providing different seed materials having different radiation characteristics, the ablating effects on various areas of the ablating surface can be analyzed under any prevailing ablation conditions. The ablating article can be provided with means for detecting the radiation characteristics of the ablated seed material to provide a self-contained analysis unit

Rotor systems research aircraft airplane configuration flight-test results

The rotor systems research aircraft (RSRA) has undergone ground and flight tests, primarily as a compound aircraft. The purpose was to train pilots and to check out and develop the design flight envelope. The preparation and flight test of the RSRA in the airplane, or fixed-wind, configuration are reviewed and the test results are discussed

Orbit transfer rocket engine technology program: Automated preflight methods concept definition

The possibility of automating preflight engine checkouts on orbit transfer engines is discussed. The minimum requirements in terms of information and processing necessary to assess the engine'e integrity and readiness to perform its mission were first defined. A variety of ways for remotely obtaining that information were generated. The sophistication of these approaches varied from a simple preliminary power up, where the engine is fired up for the first time, to the most advanced approach where the sensor and operational history data system alone indicates engine integrity. The critical issues and benefits of these methods were identified, outlined, and prioritized. The technology readiness of each of these automated preflight methods were then rated on a NASA Office of Exploration scale used for comparing technology options for future mission choices. Finally, estimates were made of the remaining cost to advance the technology for each method to a level where the system validation models have been demonstrated in a simulated environment

Engineering tests of the C-141 telescope

Data on image quality, chopper performance, and the closed-loop operation of the 91 cm telescope of the Kuiper Airborne Observatory which were obtained in September 1977 are presented

Electron Self Energy for Higher Excited S Levels

A nonperturbative numerical evaluation of the one-photon electron self energy for the 3S and 4S states with charge numbers Z=1 to 5 is described. The numerical results are in agreement with known terms in the expansion of the self energy in powers of Zalpha.Comment: 3 pages, RevTeX, to appear in Phys. Rev.

A method for computing chemical-equilibrium compositions of reacting-gas mixtures by reduction to a single iteration equation

Computing equilibrium chemical composition and thermodynamic properties of reacting gas mixtures by reduction to single iterative equatio

Two-Loop Bethe Logarithms

We calculate the two-loop Bethe logarithm correction to atomic energy levels in hydrogen-like systems. The two-loop Bethe logarithm is a low-energy quantum electrodynamic (QED) effect involving multiple summations over virtual excited atomic states. Although much smaller in absolute magnitude than the well-known one-loop Bethe logarithm, the two-loop analog is quite significant when compared to the current experimental accuracy of the 1S-2S transition: it contributes -8.19 and -0.84 kHz for the 1S and the 2S state, respectively. The two-loop Bethe logarithm has been the largest unknown correction to the hydrogen Lamb shift to date. Together with the ongoing measurement of the proton charge radius at the Paul Scherrer Institute its calculation will bring theoretical and experimental accuracy for the Lamb shift in atomic hydrogen to the level of 10^(-7).Comment: 4 pages, RevTe

Vertex-Unfoldings of Simplicial Polyhedra

We present two algorithms for unfolding the surface of any polyhedron, all of whose faces are triangles, to a nonoverlapping, connected planar layout. The surface is cut only along polyhedron edges. The layout is connected, but it may have a disconnected interior: the triangles are connected at vertices, but not necessarily joined along edges.Comment: 10 pages; 7 figures; 8 reference

Hypersonic test facility Patent

Hypersonic test facility for studying ablation in models under high pressure and high temperatur